Ordering Paper And Other Supplies; Resetting To Factory Settings - Lexmark 4600 Series User Manual

Ordering paper and other supplies

To purchase supplies or to locate a dealer near you, visit our Web site at www.lexmark.com.
For best results when printing photos or other high-quality images, use Lexmark Photo Paper or Lexmark PerfectFinish
Photo Paper and Lexmark print cartridges.
Item
Lexmark Photo Paper
Lexmark PerfectFinish Photo Paper
USB cable

Resetting to factory settings

Resetting all settings
You can reset your printer to the original settings without using the printer menus.
Note: Resetting to factory default settings will delete all the printer settings you have previously selected.
1
Turn off the printer.
Note: Make sure the printer is not in Power Saver mode. Press and hold
If you have set the Power Saver timeout in the Setup menu, press and hold
the menu.
2
From the printer control panel, press and hold
Resetting menu settings
1
From the printer control panel, press
2
Press the arrow buttons until Defaults appears, and then press
3
Press the arrow buttons until Set Defaults appears, and then press
4
Press the arrow buttons until Use Factory appears, and then press
5
Press again.
6
When prompted, press the arrow buttons to select a language, and then press
7
Press the arrow buttons to select a country, and then press
Initial Setup Complete appears on the display.
Description
•
Letter
•
A4
•
4 x 6 in.
•
10 x 15 cm
•
Letter
•
A4
•
4 x 6 in.
•
10 x 15 cm
•
L
Part number 1021294
and , and then press
.
.
103
for 2 seconds to turn off the printer.
according to the time you set in
to turn the printer on.
.
.
.
.