Retrieving And Managing Photos; Transferring Photos From A Memory Device To The Computer - Lexmark 4600 Series User Manual

Note: The printer recognizes one active media device at a time. If you insert more than one media device, a message
appears on the display prompting you to designate the device you want the printer to recognize.

Retrieving and managing photos

Transferring photos from a memory device to the computer

Using the printer control panel
Notes:
•
You cannot transfer photos from a memory device to a computer through an external network adapter that does
not support memory device connection.
•
The printer may require that you select a computer (and a PIN if required by that computer).
1
Insert a memory card, flash drive, or digital camera set to mass storage mode.
2
From the printer control panel, press
3
Press the arrow buttons until Save Photos appears, and then press
4
Do one of the following:
USB connection
a
Press .
b
Press .
c
On the computer screen, select an option to save photos to the computer.
d
Follow the instructions on the computer screen.
Wireless connection (selected models only)
a
Press the arrow buttons until Network appears, and then press
b
If prompted, press the arrow buttons to select the network computer where you want to save the photos,
and then press
Notes:
•
You may be prompted to enter a PIN if the computer requires it. To assign a computer name and a PIN
to the network computer, see the Help for the printer software associated with your operating system.
•
Use the arrow buttons to increase or decrease the value for each digit (the default value is 0000) in the
PIN, and then press
.
.
each time you select a digit.
.
.
75