Page Does Not Print - Lexmark 4600 Series User Manual

R
ECONNECT THE POWER SUPPLY
1
Press to turn the printer off.
2
Disconnect the power cord from the wall outlet.
3
Gently remove the power supply from the printer.
4
Reconnect the power supply to the printer.
5
Plug the power cord into the wall outlet.
6
Press to turn the printer on.
T
EMPORARILY DISABLE SECURITY PROGRAMS IN
1
Close all open programs.
2
Disable any security programs.
3
Do one of the following:
•
In Windows Vista, click
•
In Windows XP and earlier, click Start.
4
Click Computer or My Computer.
5
Double-click the CD or DVD drive icon.
6
If necessary, double-click setup.exe.
7
Follow the instructions on the computer screen to install the software.
8
When the installation is completed, enable the security software again.

Page does not print

These are possible solutions. Try one or more of the following:
C
HECK MESSAGES
If an error message appears, then resolve the error before trying to print again.
C
HECK POWER
If the light is not on, then make sure that the power cord is properly connected to the printer and plugged into
a known working electrical outlet that other electrical devices have been using.
R
EMOVE AND THEN RELOAD PAPER
C
HECK INK
Check the ink levels, and then install new print cartridges if necessary.
W
.
106
INDOWS