Self Tests - Nokia NSM–3 Service Manual

PAMS Technical Documentation
Self Tests... command
Activation
Alt, E,S
Command is used for reading self test results and running self tests.
When the selection is made, the test result is read from ME. The test re-
sult will be shown to the the user within MCU Self–test dialog.
Dialog mode: modal
MCU Self–test dialog includes following items:
Tests list box (ALT+T):
Test states are updated according to results received from the phone.
Possible test states will be one of the next:
Note that power–off test have no values, because if test has been
passed, power has been turned off. If power–off test fails a special error
message window is shown. If no response is received to power off test
Issue 4 02/2002
Status Bar Text
Open MCU Self–tests dialog box
The field "(p)" in the screen example means that the test is also
run in power up. The field "/s)" means that this test is select-
able one.
Passed
Failed
No response
Not executed
Not valid
RUNNING....
E Nokia Mobile Phones Ltd.
NSM–3/3D
Service Software Instructions
Page 45