Installing The Service Software On Pc Hard Disk; First Time Installation Of Wintesla - Nokia NSM–3 Service Manual

NSM–3/3D
Service Software Instructions

Installing the Service Software on PC Hard Disk

The program is delivered on a diskette and is copy protected with a
dongle PKD–1. It must be present in parallel port when using Service
software.
The program must be installed on the hard disk before use.
Keep the original diskette safe to enable upgrading of the program !

First time installation of WinTesla:

Do the following to make a complete WinTesla installation with support for
NSM–3 (3D):
Insert the WinTesla software diskette into the floppy drive on your com-
puter (i.e. Drive A:)
For Windows 3.1 and 3.11:
Start Windows, type
Open the File manager, open Main window and start File manager.
Select the floppy drive and:
Start installation, double–click the
Follow the instructions on the screen. Write down the directory where
WinTesla is installed on your hard disk.
When installation is completed remove the WinTesla software disk from
your floppy drive.
Insert the Dongle driver diskette into your floppy drive.
Select the floppy drive and:
Start installation, double–click the
Follow the instructions on the screen.
When installation is completed remove the dongle driver software disk
from your floppy drive.
Continue with the support modules installation.
For Windows 95 and NT:
Open Microsoft Explorer, Select
Select the floppy drive and:
Start installation, double–click the
Follow the instructions on the screen. Write down the directory where
WinTesla is installed on your hard disk.
When installation is completed remove the WinTesla software disk from
your floppy drive.
Insert the Dongle driver diskette into your floppy drive.
Select the floppy drive and:
Page 8
win <Enter>
wt_inst.exe
dk2wn16.exe
Start –Programs – Explorer
wt_inst.exe
E Nokia Mobile Phones Ltd.
PAMS Technical Documentation
file.
file.
file.
Issue 4 02/2002