RM-36
BB Troubleshooting and Manual Tuning Guide
6. In the Bluetooth LOCALS window, write the 12-digit serial number on the "Counterpart BT Device Address"
line.
This needs to be done only once provided that JBT-9 is not changed.
7. Place the JBT-9 box near (within 10 cm) the BT antenna and click Run BER Test.
Results
Bluetooth self tests in Phoenix
Steps
1. Start Phoenix service software.
2. From the File menu, choose Open Product, and then choose the correct type designator from the Product list.
3. Connect the phone to a docking station in the local mode.
4. From the Testing menu, choose Self Tests.
5. Choose the following Bluetooth related tests:
• ST_LPRF_IF_TEST
• ST_LPRF_AUDIO_LINES_TEST
• ST_BT_WAKEUP_TEST
6. To run the tests, click Start.
Issue 1
Figure 59 Phoenix settings for Bluetooth troubleshooting
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
Nokia Customer Care
Page 6–45