Installation; Mechanical Connections - Nokia NSM–3 Service Manual

PAMS Technical Documentation

Installation

Mechanical Connections

Caution: Make sure that you have switched off the PC and the printer
Caution: Do not connect the PKD–1 key to the serial port. You may
The software controls the phone via a separate adapter connected to the
serial port of the PC, and to the telephone's M2BUS (DAU–9S).
Attach the dongle PKD–1 to the parallel port 1 (25–pin female D–connec-
tor) of the PC. When connecting PKD–1 to the parallel port, be sure that
you insert the computer side of the PKD–1 to the PC (male side). If you
use a printer on parallel port 1, install the PKD–1 between the PC and
your printer cable.
The PKD–1 should not affect devices working with it. If some errors occur
(errors in printing are possible) please try printing without the PKD–1. If
printing is OK without the PKD–1 please contact your dealer. We will offer
you a new PKD–1 in exchange for your old one.
Issue 4 02/2002
before making connections.
damage your PKD–1 !
E Nokia Mobile Phones Ltd.
NSM–3/3D
Service Software Instructions
Page 7