Self Tests - Nokia NSW-5 Series Service Manual

PAMS Technical Documentation
Self Tests... command
Activation
Alt, E,S
Command is used for reading self test results and running self tests.
When the selection is made, the test result is read from ME. The test re-
sult will be shown to the user within MCU Self–test dialog.
MCU Self–test dialog box includes following items:
Tests list box (ALT+T):
Run button (ALT+R):
Issue 1 10/00
Status Bar Text
Open MCU Self–tests dialog box
Test states are updated according to results received from the
phone. Possible test states will be one of the next:
Passed
Failed
No response
Not executed
RUNNING....
User can select desired test from list and hit Run button. When
user selects test to be run the text RUNNING... is shown in test
state field. When results are received the test state field is up-
dated according to the result.
If no response was received in the defined time, an error mes-
sage box will be shown and the test state is changed to No re-
sponse .
E Nokia Mobile Phones Ltd.
Service Software Instructions
Page 45
NSW-5