Flash Phone - Nokia NSM–3 Service Manual

NSM–3/3D
Service Software Instructions
Flash Phone... command
Activation
Alt, D,F
This command is used for flashing new software into the phone. When
flashing dead phone, the user may be asked to select phone type. If more
than one phone is flashed without closing the dialog, then the user must
press Check button after the phone has been replaced.
Selection opens the following Flash Phone dialog box. When flashing is
started, waiting window is displayed, telling the user the estimated flash-
ing time.
Flashing files are delivered in product and market area specific flash
packages. These packages should be unpacked to product specific sub-
directory of WinTesla directory e.g. C:\WINTESLA\NSM–X for NSM–X
flash. This directory will then contain product specific INI–file e.g. NSM–
X.INI in which the different market areas and files are described.
NOTE: This is a screen sample for NSM–3, actual information may differ.
Dialog mode: modal
Page 72
Status Bar Text
Open Flash Phone dialog box.
E Nokia Mobile Phones Ltd.
PAMS Technical Documentation
Issue 4 02/2002