Nokia NSM–3 Service Manual page 256

NSM–3/3D
Service Software Instructions
Number edit box (ALT+N):
Group edit box:
SCM list box (ALT+C):
Write MS / Write SIM button (ALT+W):
Read MS / Read SIM button (ALT+R):
Save File... button (ALT+S):
Load File... button (ALT+L):
Memory group box:
When all values are sent and responses received, the waiting window is
removed and Edit SCM is back in control. The waiting state can be bro-
ken with Cancel (ESC) button. If writing to the ME is broken, only part of
the SCM entries in the ME may be changed.
Page 66
Edit the Name.
Edit the Number.
Edit the Group number.
List for available names and numbers.
Write SCM values to phone or SIM and checks the validity of
names and numbers.
Read SCM values from phone or SIM.
Opens a default Windows File Save As dialog and asks file-
name where to save SCM values.
Opens a default Windows File Open dialog and asks filename
where from load SCM values. Checks the validity of names
and numbers.
When memory is selected SCM list box size is adjusted to cor-
respond memory size. Adjusting is done either adding empty
entries to the end or removing entries from the list box.
SIM radio button:
Selects dialog to edit SIM memory. NOTE: PIN code must
be set before editing SIM. During SIM selection the user
may be asked to insert PIN code and/or wait for SIM to
wake up.
MS radio button:
Selects dialog to edit phone memory. This is the default
when dialog is opened.
E Nokia Mobile Phones Ltd.
PAMS Technical Documentation
Issue 4 02/2002