Tx Power - Nokia NSM–3 Service Manual

PAMS Technical Documentation
Tx Power... command
Activation
Alt, T, X
Starts TX power tuning.
When the user has PKD–1 dongle in place tuning is started automatically
with EEPROM values.
Tuning values are loaded from program's internal memory.
The next automatic selections are made when this tuning function is acti-
vated:
The TX Power Tuning dialog will be activated automatically after value
selection.
NOTE: Make sure you are working with GSM900 band. First tune power
levels 5, 15 and 19. Then Calculate the other levels and save the values.
After this switch to PCN band and do the tuning to levels 0, 11 and 15.
Then Calculate the other levels and save the values.
GSM900 TX Power Tuning dialog:
GSM1800 TX Power Tuning dialog:
Issue 4 02/2002
Status Bar Text
Open TX Power Tuning dialog box
the BASE power level is selected
Operation mode = TX pulsed
E Nokia Mobile Phones Ltd.
NSM–3/3D
Service Software Instructions
Page 33