Nokia NSM–3 Service Manual page 227

PAMS Technical Documentation
Tune Amplitude Difference scroll bar (ALT+A):
Tune Phase Difference scroll bar (ALT+P):
Save/OK button (ENTER):
Cancel button (ESC):
After each value change the new value is sent to the phone.
The next automatic selection is made when TX I / Q tuning function is en-
ded:
NOTE: Tuning needs to be done for GSM900 and GSM1800 bands sepa-
rately.
Issue 4 02/2002
value range is –100%...100%. The value is rounded to the
nearest integer value.
When this selection is made the user can increase or decrease
the amplitude difference within 0.1 dB steps. The value range
is –1...1.
When this selection is made the user can increase or decrease
the phase difference within 0.5 steps. The current phase dif-
ference is shown on the tuning window with numbers and bar
figure. The value range is 85...95.
Dialog is closed and tuning is saved to phone. When tuning
NSM–X phones in GSM band button values are only saved to
PC memory and those values may be used when tuning is
started in PCN band.
Dialog is closed and tuning is not saved to phone.
Operation Mode = RX pulsed
Update RF Information window
E Nokia Mobile Phones Ltd.
NSM–3/3D
Service Software Instructions
Page 37