Lexmark 1200 User Manual page 98

84
Chapter 5: Paper handling
f
Press to return the printer to the ready state.
Go
2
Select the paper size.
Since the multipurpose feeder does not automati-
cally sense the size of the media you loaded, you
must select the correct paper size.
If you set the size from your software application or
driver, press
Go
appears on the display. Follow the instructions
below to set the size from the operator panel or
from MarkVision:
a
Press
Menu>
appears on the second line of the dis-
Paper Menu
play.
b
Press to open the Paper menu.
Select
c
Press
Menu>
second line of the display.
d
Press to select Paper Size.
Select
e
Press and release
appears on the second line of the display.
f
Press to open a list of paper and envelope
Select
sizes.
g
Press
Menu>
of sizes.
h
When the size you need appears on the second
line of the display, press
i
Press to return the printer to the ready state.
Go
3
Make sure the Paper Type setting is appropriate
for the media you're loading in the feeder.
See page 18 or refer to the Setup Guide for more
information about the Paper Type setting.
4
When the printer is in the ready state, send the job
to print.
when the message
Load MP Tray
or to enter the menus.
<Menu
until appears on the
PAPER SIZE
until
Menu> MP Feeder Size
or to scroll through the list
<Menu
.
Select