Lexmark 1200 User Manual page 91

Multipurpose feeder
Notch
Note:
To create a straight
paper path and minimize curling,
load transparencies in the multi-
purpose feeder and stack them
in the rear output bin.
Tray 1
Cardboard
Loading transparencies
Before loading transparencies, fan the stack to prevent
sheets from sticking together. To prevent print quality
problems, avoid getting fingerprints on the transparen-
cies.
Load transparencies only in the multipurpose feeder or
tray 1. Your printer does not feed transparencies from
tray 2 or tray 3.
Load transparencies with the corner notch oriented as
shown. This properly positions the specially coated print
side. For more information, refer to the detailed loading
instructions packaged with the transparencies.
When loading transparencies in tray 1, use the piece of
cardboard with the rectangular cutout that comes with the
transparencies. Place the cardboard in the bottom of the
tray before loading transparencies. The cardboard ensures
Notch
proper feeding of the last transparency in the stack.
Only use the cardboard when loading transparencies in
tray 1. Do not use the cardboard in the multipurpose
feeder.
Media guidelines
77