Lexmark 1200 User Manual page 122

Attendance messages (continued)
Message
84 Color PC Life Warning
84 Black PC Drum Exhausted
84 Color PC Drums Exhausted
84 color PC Abnormal
88 color Toner Low
88 color Toner Empty
108
Chapter 7: Solving printer problems
Action
This message alerts you that you can print approximately 100 pages before the
Color PC Drums Exhausted
photoconductors on hand, order them now. See page 89 for more information
about ordering new supplies.
Note: The cyan, magenta, and yellow photoconductors come packaged together.
You cannot order them separately.
Press Go to clear the message and continue printing. The
message is then displayed with the
messages—unless another status message of higher priority is posted—until you
replace the photoconductor.
The black photoconductor has reached the end of its 13,000-page life. You may
want to replace the photoconductor now. See page 94 for more information.
If the print quality is still acceptable, press
printing. The status message is then displayed with the
Supplies
, and
Saver Busy Waiting
priority is posted—until you replace the photoconductor.
When you replace the black photoconductor, make sure you also install the new
fuser coating roll that is included in the black photoconductor kit.
The three color photoconductors have reached the end of their 13,000-page life.
You may want to replace the photoconductors now. When you do replace them,
replace all three—cyan, magenta, and yellow—at the same time. See page 94 for
more information.
If the print quality is still acceptable, press
printing. The status message is then displayed with the
Supplies
, and
Saver Busy Waiting
priority is posted—until you replace the photoconductors.
You have installed a defective photoconductor. You must replace the specified
photoconductor before you can continue printing.
The printer has detected that the toner supply in the specified cartridge is low.
After printing approximately 250 more pages, the printer will display the
message and cease operating until the toner cartridge is replaced. If
Toner Empty
you do not have the necessary supplies on hand, order them now. See page 89 for
more information about ordering new supplies.
Press to clear the message. The
Go
with the ,
Ready Power Saver
message of higher priority is posted—until you replace the toner cartridge. The
88 color Toner Low message is also displayed each time you turn the printer on
and each time you open and close the top cover.
The printer has detected that the specified toner cartridge is completely out of
toner. You must install a new toner cartridge before you can continue printing. See
page 93 for more information.
message appears. If you do not have new color
Ready , Power Saver
to clear the message and continue
Go
messages—unless another status message of higher
to clear the message and continue
Go
messages—unless another status message of higher
status message is then displayed
Supplies
, and messages—unless another status
Busy Waiting
Supplies status
, Busy and Waiting
,
Ready Power
,
Ready Power
88 color