Lexmark 1200 User Manual page 117

Lexmark international printer user's guide optra color 1200
Hide thumbs Also See for 1200:
Table of Contents

Advertisement

Attendance messages
Message
Close Top Covers
Insert Tray x
Change tray
Load tray
Load Manual
Remove Paper
Top Output
Action
Close the printer's top cover and rear cover.
Insert the tray indicated (tray 1, 2, or 3).
The printer is requesting a different size or type media than what it detects is in the
identified tray (tray 1, 2, 3, or the multipurpose feeder). The message displays
either the custom media name defined using the MarkVision utility, the media size,
or the media size and type it is looking for.
To clear the message:
• If the correct paper type is loaded in the tray (but the Paper Type setting was not
changed from the operator panel), press
• Press
to ignore the request and print on the media already installed in
Select
the tray.
• Load media of the requested size and type in the tray indicated.
• If you're printing on larger paper, make sure the Size Detection setting is
correct. See page 21 for more information.
• Cancel the print job. Press
or
until Cancel Job appears on the second line. Press
Menu>
<Menu
The printer is trying to feed paper from a source it detects is empty (tray 1, 2, 3, or
the multipurpose feeder). The message displays either the custom media name
defined using the MarkVision utility, the media size, or the media size and type it is
looking for.
To clear the message:
• Load media of the requested size and type in the tray indicated.
• If you're printing on larger paper, make sure the Size Detection setting is
correct. See page 21 for more information.
• Cancel the print job. Press
Menu>
or
<Menu
until Cancel Job appears on the second line. Press
You have sent a request for a manual feed job to the printer, and the printer is
ready for you to insert a single sheet or envelope into the multipurpose feeder. The
message displays either the custom media name defined using the MarkVision
utility, the media size, or the media size and type it is looking for.
To clear the message:
• Load media of the requested size and type in the multipurpose feeder.
• Press
or Go to ignore the manual feed request and print on media
Select
already installed in one of the paper sources. If the printer finds a tray that has
media of the correct size and type, it feeds media from that tray. If the printer
cannot find a tray with the correct media size and type, it prints on whatever
media is installed in the default paper source.
• Cancel the print job. Press
or
until Cancel Job appears on the second line. Press
Menu>
<Menu
The top output bin is full. Remove the stack of paper and press
to continue printing.
Go
or
. The Job Menu is displayed. Press
Menu>
<Menu
Menu>
or
<Menu
. The Job Menu is displayed. Press
or
. The Job Menu is displayed. Press
Menu>
<Menu
Understanding printer messages
Select.
Select.
Select.
Go
.
103

Advertisement

Table of Contents
loading

This manual is also suitable for:

Optraimage color 1200rOptra color 1200

Table of Contents