Serial Menu - Lexmark 1200 User Manual

Serial Menu

Menu item Values
PCL SmartSwitch Off
On*
Setting PCL SmartSwitch On lets the printer examine the data on the serial interface
connection and select PCL emulation if the data indicates that is the printer language.
If both PCL SmartSwitch and PS SmartSwitch are set Off, the printer uses the language
specified in the Printer Language menu as the default. If only one SmartSwitch setting is set
Off, the printer uses the language that has its SmartSwitch setting set On as the default.
PS SmartSwitch Off
On*
Setting PS SmartSwitch On lets the printer examine the data on the serial interface
connection and select PostScript Level 2 emulation if the data indicates that is the printer
language.
If both PCL Smartswitch and PS Smartswitch are set Off, the printer uses the language
specified in the Printer Language menu as the default. If only one SmartSwitch setting is set
Off, the printer uses the language that has its SmartSwitch setting set On as the default.
NPA Mode On
Off
Auto*
NPA is a mode of bidirectional communication that follows the conventions defined in Network
Printing Alliance Protocol, A Printer/Host Control Specification Developed by the NPA .
NPA mode requires special processing of the print data. If NPA Mode is set On, the data
received must be in NPA format. If not, it is rejected as bad data. If NPA Mode is set Off, the
printer does not perform any NPA processing. If NPA Mode is set to Auto, the printer examines
the data to determine the format and then processes it in either format.
The NPA Mode setting in the Serial Menu applies only to the serial interface connection.
Note: Changing the NPA Mode setting automatically resets the printer.
*Factory default
Serial Menu
Use the Serial Menu to change settings affecting jobs sent
to the printer via the serial interface port. This menu is
only available if an optional tri-port adapter is installed in
your printer.
When you select Serial Menu from the operator panel,
Serial Option 1 or Serial Option 2 appears on the second
line of the display, depending on whether a tri-port
adapter is installed in connector 1, connector 2, or both.
When the correct option is displayed, press
the menu items listed in the following table.
to view
Select
43
Menus