Lexmark 1200 User Manual page 124

Print quality problems (continued)
Problem
Colored lines, streaks, or
smudges appear on the printed
page, or print appears blurred or
unclear.
Toner specks appear on the page. Replace the fuser coating roll. If it is not time to order a black photoconductor kit,
Toner colors the background of
the page.
The page has 100% coverage of
one color.
110
Chapter 7: Solving printer problems
Action
Replace the photoconductors. If the problem only occurs when printing black,
you can replace just the black photoconductor and fuser coating roll. If the
problem occurs when printing one of the colors, replace all three of the color
photoconductors. See page 94 for more information.
which includes a fuser coating roll, order a separate fuser coating roll
(P/N 12A1706). See page 95 for more information.
Make sure the affected print unit is completely installed in the printer.
Make sure the system board is completely inserted in the printer and the thumb-
screws are securely tightened. Refer to the Setup Guide for installation
instructions.
Make sure the affected print unit is completely installed in the printer.
Replace the photoconductors. If the page is black, you can replace just the black
photoconductor. If the page is another color, replace all three of the color photo-
conductors. See page 94 for more information.