Lexmark 1200 User Manual page 115

Status messages (continued)
Message
Ready Hex
Locking Menus
Unlocking Menus
Menus Disabled
Supplies
Maintenance
Parallel
Parallel x
Serial x
Network x
LocalTalk x
Infrared x
Fax
Cancelling Job
Resetting the Printer
Flushing Buffer
Printing Menu Settings
Meaning
Hex Trace diagnostic mode is active, and the printer is ready to receive data. Use
Hex Trace to isolate the source of a print job problem. With Hex Trace selected, all
data sent to the printer is printed in hexadecimal and character representation.
Control code strings are printed, not executed.
To exit Hex Trace mode, turn the printer off or reset the printer. To reset the printer,
press or . The Job Menu is displayed and Reset Printer appears on
Menu> <Menu
the second line. Press
Select
Someone has locked the menus. While the menus are locked, users cannot
change the printer default settings from the operator panel. See "Locking the
menus" on page 10 for more information.
Someone has unlocked the menus. Users can now change the printer default
settings from the operator panel. See "Locking the menus" on page 10 for more
information.
Menus have been locked, or disabled. See page 10 for more information.
At least one of the printer supplies needs attention. You may have a paper tray that
is low on paper or a toner cartridge or photoconductor that needs replacing. Press
or to open the Supplies Menu. See page 13 for more information
Menu> <Menu
about the menu.
It's time to replace the fuser, transport belt, and roller set. See "Replacing
service items" on page 98 for more information.
The standard parallel interface is the active communication link.
The specified parallel interface is the active communication link.
The specified serial interface is the active communication link.
The specified network interface is the active communication link.
The LocalTalk interface is the active communication link.
The infrared interface is the active communication link.
The Fax interface is the active communication link.
The printer is processing a request to cancel the print job.
The printer is deleting any print jobs in progress and restoring all print settings to
the user defaults.
The printer is flushing corrupted print data and discarding the current print job.
A list of the user default settings and the installed options is printing.
To cancel the print job, press
or until Cancel Job appears on the second line. Press
Menu> <Menu
.
or . The Job Menu is displayed. Press
Menu> <Menu
Understanding printer messages
.
Select
101