Lexmark 1200 User Manual page 119

Attendance messages (continued)
Message
38 Memory Full
39 Complex Page
52 Flash Full
53 Unformatted Flash
54 Parallel Error
Action
The printer is processing the job, but the memory used to store pages is full.
• Press to clear the message and continue printing. Some data may not print
Go
or may not print correctly.
• Cancel the print job. Press
Menu> or <Menu until Cancel Job appears on the second line. Press
To reduce the complexity of the job:
– Reduce the number of graphics or images on a page.
– Delete unnecessary downloaded fonts or macros.
– Change the Print Quality setting.
• Install additional printer memory to avoid future Memory Full errors.
The text, graphics, and print information on the page require more memory to print
than what you have installed in your printer.
to clear the message and continue printing. Some data may not print
• Press Go
or may not print correctly.
• Cancel the print job. Press
or until Cancel Job appears on the second line. Press
Menu> <Menu
To avoid another Complex Page error:
– Set Page Protect On from the Setup Menu and resend the job.
– Reduce the complexity of the page by using fewer fonts, macros, and
graphics.
– Install additional printer memory.
There is not enough space available to hold the resources you want to store in
flash memory.
• Press to clear the message and continue processing. Downloaded fonts
Go
and macros not previously stored in flash memory or disk are deleted.
• Reset the printer. Press
Menu> or <Menu until Reset Printer appears on the second line. Press
The flash memory installed in your printer has not been formatted. You must
format the flash memory before downloading resources.
Press Go to clear the message. To format flash memory, select Format Flash from
the Tests Menu.
The printer has detected a protocol error on the standard parallel interface. Check
the cable connection between the printer and the computer, and make sure the
cable is not defective.
• Press to clear the message and continue printing. The job may not print
Go
correctly.
• Reset the printer. Press
or until Reset Printer appears on the second line. Press
Menu> <Menu
or . The Job Menu is displayed. Press
Menu> <Menu
or . The Job Menu is displayed. Press
Menu> <Menu
Menu> or <Menu . The Job Menu is displayed. Press
or . The Job Menu is displayed. Press
Menu> <Menu
Understanding printer messages
Select .
.
Select
Select .
.
Select
105