No Dial Tone; Power Saver; Programming Engine Code Do Not Power Off; Programming System Code Do Not Power Off - Lexmark 231 User Manual

Troubleshooting 179

No dial tone

The printer does not have a dial tone. Wait for the message to clear.

Power Saver

The printer is saving power while it waits for the next print job. Send a job to print to take the printer out of Power
Saver mode.

Programming Engine Code DO NOT POWER OFF

Wait for the message to clear.
Warning—Potential Damage: Do not turn the printer power off while Programming Engine Code appears on
the display.
Programming flash DO NOT POWER OFF
Wait for the message to clear.
Warning—Potential Damage: Do not turn the printer power off while Programming flash appears on the
display.

Programming System Code DO NOT POWER OFF

Wait for the message to clear.
Warning—Potential Damage: Do not turn the printer power off while Programming System Code appears on
the display.

Queued for sending

The scanning process of a fax job completed, but the job is not sent yet because another fax job is being sent or received.
Wait for the message to clear.
Remove packaging material, check <x>
Remove any remaining packaging material from the specified location.

Remove paper from standard output bin

Remove the stack of paper from the standard exit bin.

Scanner ADF Cover Open

The ADF cover is open. The message clears when the cover is closed.