No Dial Tone - Lexmark 13B0503 - X 364dw B/W Laser User Manual

Line busy
A fax number is dialed, but the fax line is busy. Wait for the message to clear.
Load manual feeder with <x>
Try one or more of the following:
•
Load the specified paper in the multipurpose feeder.
•
Cancel the current job.
Load <src> with <x>
Try one or more of the following:
•
Load the tray or other source with the correct paper type and size.
•
Cancel the current job.
Memory full, cannot send faxes
The printer fax memory is full. Press
•
Reduce the fax resolution and try to send the fax again.
•
Reduce the number of pages in the fax and try to send the fax again.
Network/Network <x>
The printer is connected to the network.
Network indicates that the printer is using the standard network port built into the printer system board. Network
<x> indicates that an internal print server is installed inside the printer or that the printer is connected to an external
print server.
No analog phone line
The analog phone line was not detected; the fax is disabled. Connect the printer to an analog phone line.
No answer
A fax number is dialed, but no connection is made. Wait for the message to clear.

No dial tone

The printer does not have a dial tone. Wait for the message to clear.
Power Saver
The printer is saving power while it waits for the next print job. Send a job to print to take the printer out of Power
Saver mode.
to clear the message and cancel the fax.
Troubleshooting
178