Lexmark 231 User Manual page 27

Additional printer setup
Installing the printer on a wireless network (Windows)
Before you install the printer on a wireless network, make sure that:
•
Your wireless network is set up and working properly.
• The computer you are using is connected to the same wireless network where you want to set up the printer.
1
Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the printer
on.
1
Note: For fax setup, see the User's Guide on the Software and Documentation CD.
Make sure the printer and computer are fully on and ready.
Do not connect the USB cable until instructed to do so on the screen.
2
Insert the Software and Documentation CD.
3
Click Install Printer and Software.
4
Click Agree to accept the terms of the License Agreement.
5
Select Suggested and then click Next.
6
Click Wireless Network Attach.
2
27