Honda CRF50F 2004-2015 Service Manual page 93

CYLINDER HEADIVALVES
Route the cam chain through the cylinder head and
install the cylinder head.
Install the cylinder
Install a new gasket onto the cylinder head and then
head COlier with
irS
install the cyl inder head cover. HEAD
C()VI'~l:
arrow mark facing
down
Install the following:
- Cap nuts/new sealing washers
- Nut/new sealing washer
• Note the position of the washers and nuts.
Tighten the cylinder head cover nuts to the specified
torque.
TORQUE: '1 N'm
(1 .1 kgf·m ,
8 Ibf.ft)
Install and tighten the cylinder head mounting bolt.
If the cylinder was removed, tighten the cylinder
mount ing bolt.
ARROW
Install a new O-ring into the groove in the intake .. - ...,,...- -- -..
manifold.
Install and tighten the intake manifold bolls.
Inslalilhe following:
- Spark plug (page 3-8)
- Muffler (page 2-5)
- Camshaft (page 7-18)
7·17