Honda CRF50F 2004-2015 Service Manual page 146

CRANKSHAFT ITRANSMISSION/KICKSTARTER
Apply engine oil to the shift drum outer surface.
Install the shift forks onto the gearshift drum. CLIP
11-12
Install the guide pins and secure them with the
clips.
If the washer has been removed, install a new
washer and bend the tab to lock the washer.
TRANSMISSION BEARING
REPLACEMENT
Turn the inner race of each bearing with your finger.
The bearings should turn smoothly and quietly.
Also check that the bearing outer race fits tightly in
the crankcase.
Remove and discard the bearing
if
the race does not
turn smoothly, quietly. or fils loosely in the crank-
case.
Remove the countershaft oil seal.
Drive the mainshaft bearing out of the right crank-
case.
GUIDE PIN
fI
WASHER