Honda CRF50F 2004-2015 Service Manual page 131

Installlhe spong
WIth {/'Ie tapered
Side facing the push
wd.
ALTERNATOR/CAM CHAIN TENSIONER
INSPECTION
Measure the tensioner spring free length .
SERVICE LIMIT: 100
mm
(3.9
in)
Check the push rod for wear or damage.
Measure the push rod
a.D.
SERVICE LIMIT: 11.94
mm
(0.470
in)
INSTALLATION
Install the cam chain tensionar railer, tensioner arm
[~~~J
and pivot boll.
Tighten the pivot bolt to the specified torque.
TORQUE: 16 N'm (1.6 kgf.m . 12 IbHt)
Check the sealing washer is in good condition,
replac e if necessary.
Install the push rod, spring, washer and seating bolt.
Tighten the sealing bolt to the specified torque.
TORQUE: 23 N'm (2.3 kgf·m. 17 Ibf.ft)
~----
BOL TIWASHEA
10-7