Honda CRF50F 2004-2015 Service Manual page 147

CRANKSHAFT ITRANSMISSION/KICKSTARTER
Drive the countershah bearing out of the left crank-
case.
Drive new ma i nshaft bearing into the crankcases
using the special tools as shown.
TOOLS:
Driver: 07749-0010000
Attachment, 37 x 40 mm : 07746·0010200
Pitot, 17 mm: 07746·0040400
Drive new countershaft bearing into the crankcases
using the same tools.
Apply engine o i l to a new countershaft oil seal lip.
Install the countershaft oil seal.
TRANSMISSION INSTALLATION
Apply clean engine oil to the transmission gears
and shift drum.
Set the right fork into the M3 gear and the left fork
into the C2 gear to assemble the mainshaft.
countershaft and shift drum as shown.
SHIFT DRlJM/:SHII".F<)RKS
COUNTERSHAFT
11-13