Honda CRF50F 2004-2015 Service Manual page 158

FRONT WHEEL/BRAKE/SUSPENSION/STEERING
INSTALLATION
Install the handlebar into the fork top bridge and
tighten the mounting nuts.
TORQUE: 20 N ·m (2.0 kgf·m , 14 Ibf.ft)
Clean the inside surface of the left handlebar grip
~IIIIIIIIIIIIIIIIII~
__
~===---"IIIIIIIIIIIIIIIIII~'--:~
and the outside surface of the left handlebar.
Apply Honda Bond A or equivalent to the inside sur·
face of the left handlebar grip and to the outside
surface of the left handlebar.Wait 3 - 5 minutes and
install the grip.
GRIP
\
Allow
the adneslve
Rotate t he grip for even application of the adhesive.
10 dry for an hour
before uSlflg
ApplV grease to the throttle grip pipe flange and
install the throttle grip onto the right handlebar.
.~
GRIP
Connect the throttle cable to the throttle grip pipe
flange.
Install the engine stop switchlthrottle housing onto
the handlebar, aligning the m ating surface with the
punch mark on the handlebar.
Tighten the forward screw first, then the rear screw.
TORQUE: 2.9 N 'm (0.3 kgf·m, 2.2 Ibf·h )
EN GINE STO P SWITCHITHROTIlE HOUSING
12-7