Honda CRF50F 2004-2015 Service Manual page 163

FRONT WHEEL/BRAKE/SUSPENSION/STEERING
12-12
Install the front wheel between the fork legs while
aligning the brake panel groove with the boss on
the left fork slider.
Apply a thin layer of grease to the front aide surface.
Install the front axle from the right side.
Hold the axle and temporarily tighten the axle nut.
Install the spri ng and joint pin and connect the
brake cable.
Install the adjusting nut
Adjust the front brake lever free play (page 3-16).
With the front brake applied, pump the fork up and
down several times to seallhe axle and check brake
operation.
Tighten the axle nut to the specified torque.
TORQUE: 47 N'm (4.8 kgf·m , 35 Ibf.ft)
Install the fork protector and tighten the socket --BRAKE
bolts.
TORQUE: 9.8 N'm {1.0 kgf·m , 7 Ibf.ftJ
Install the brake cable into the cable holder.