Shock Absorber - Honda CRF50F 2004-2015 Service Manual

REAR WHEEL/BRAKE/SUSPENSION
Apply oil to a new dust seal and install it onto the
brake panel.
Install the wear indicator plate onto the brake cam
by aligni ng its wide tooth with the wide groove in
the brake cam .
Install the brake arm by aligning the punch marks
on the arm and brake cam.
Install a new brake arm pinch bolt and nut as shown
and tighten it to the specified torque.
TORQUE: 5.9 N'm (0.6 kgf -m , 4.3
IbUt)
Install the brake arm cover onto the arm.
Assemble the brake shoes and spring as shown and
install them onto the brake panel.
Wipe any excess grease off the brake cam and
anchor pin.
Install the rear wheel (page 13-9).
SHOCK ABSORBER
REMOVAL
13-12
Support the motorcycle securely using a hoist or
equivalent and raise the rear wheel off the ground.
Remove the seat (page 2-3).
Remove the shock absorber lower mounting nut
and bolt.
SPRING