Recording - FUNAI T3B-N8182DB Owner's Manual

E3B41BD_EN_+nasi.book Page 88 Wednesday, February 7, 2007 6:49 PM

Recording

1
Press [SETUP] in stop mode.
Setup Menu will appear.
2
Select "Recording" using
[Cursor
/
Setup Menu
Disc Management
Editing
Dubbing
Timer Programme
Title List
Initial Setting
Digital Audio Setting
Playback
Recording
Display
3
Select a desired item using
[Cursor
/
Recording
Auto Chapter [HDD]
Noise Reduction Noise Reduction
Bilingual Recording Audio Bilingual Recording Audio
Fast Dubbing Audio (Video Mode) Fast Dubbing Audio (Video Mode)
External Input Audio External Input Audio
Recording Audio Select [XP] Recording Audio Select [XP]
Initialise Initialise
4
Refer to 1. to 3. on this page and set
the selected item.
5
When you finish with the setting,
press [SETUP] to exit.
1. Noise Reduction (Default: Off)
Set the noise reduction to reduce some noise in
playback picture or to record in LP/EP/SLP mode.
(Follow steps 1 to 2 above.)
Select "Noise Reduction" using
[Cursor
/
Option window will appear.
Select the desired setting using
[Cursor
/
The selected setting will be checked and
activated.
EN
], then press [ENTER].
01/01/07(Mon) 19:34
], then press [ENTER].
01/01/07(Mon) 19:34
], then press [ENTER].
], then press [ENTER].
Strong
Weak
Off
2. Fast Dubbing Audio (Video Mode)
(Default: Off)
On: When recording a bilingual programme to the
HDD and to make the Fast Dubbing (HDD to DVD
(Video Mode)) available, the unit only records
either Main or Sub audio. (See page 31.)
Off: When recording a bilingual programme to the
HDD, the unit will record both Main and Sub
audio, however, this makes it impossible to
perform the Fast Dubbing (HDD to DVD (Video
Mode)).
(Follow steps 1 to 2 on the left.)
Select "Fast Dubbing Audio (Video
Mode)" using [Cursor
press [ENTER].
Option window will appear.
Select the desired setting using
[Cursor ], then press [ENTER].
/
On
Off
The selected setting will be checked and
activated.
3. Initialise (Default: No)
Initialise the setting in Recording.
(Follow steps 1 to 2 on the left.)
Select "Initialise" using
[Cursor ], then press [ENTER].
/
Confirmation window will appear.
Select "Yes" using [Cursor
then press [ENTER].
Initialise
Initialising the recording settings.
The Settings will be returned to
their factory default.
OK to proceed?
Yes
Your setting in Recording will be initialised.
88
], then
/
],
/
01/01/07(Mon) 19:34
No