Functional Overview; Front Panel - FUNAI T3B-N8182DB Owner's Manual

E3B41BD_EN_+nasi.book Page 8 Wednesday, February 7, 2007 6:49 PM

Functional Overview

Front Panel

2 3
PAL
STANDBY-ON STOP/EJECT REW
1
25 24*
1 STANDBY-ON button
on / off.
2 STANDBY-ON indicator
the power is on.
3 RECORD indicator (VCR)
VCR recording.
4 Cassette compartment
5 DUBBING indicator
6 OPEN / CLOSE
open / close the disc tray.
7 RECORD indicators (HDD/DVD)
during HDD/DVD recording.
8 Disc tray
: Place a disc here.
9 AUDIO input jacks (AV3)
(HDD/DVD/VCR)
an external device here using a commercially
available Audio (L / R) cable.
10 VIDEO input jack (AV3)
(HDD/DVD/VCR)
an external device here using a commercially
available Video cable.
11 S-VIDEO input jack (AV3)
(HDD/DVD/VCR)
of an external device here using a commercially
available S-Video cable.
12 RESET
: Press with a sharp pointed object to
restart the unit. Also refer to the "Note" right
below.
13 RECORD I button (HDD/DVD)
to start a basic recording. Press repeatedly to
start an OTR (One-touch Timer Recording). Each
press increases the recording time by 15 minutes
up to 4 hours.
14 PLAY button* (HDD/DVD)
P
resume playback.
15 STOP S button (HDD/DVD)
playback, recording or dubbing.
16 Device Select Buttons / Indicators
VCR
: Press to activate the VCR. Lights up when
VCR is selected.
HDD
: Press to activate the HDD. Lights up when
HDD is selected.
DVD
: Press to activate the DVD. Lights up when
DVD is selected.
Button names described in the Owner's Manual
The instructions in this manual are described mainly with the operations using the remote control. Some
operations can be carried out using the buttons on the front panel.
EN
4
F.FWD PLAY RECORD
VCR
20
22* 21
23*
: Press to turn the unit
: Lights up when
: Lights up during
: Insert a tape here.
: Lights up during dubbing.
button (DVD)
O : Press to
: Lights up
: Connect the audio output of
: Connect the video output of
: Connect the S-Video output
: Press once
: Press to start or
: Press to stop
:
5 6 7
OPEN / CLOSE
DUBBING STOP PLAY
PROG. VCR HDD DVD
VCR DVD
HDD DVD
HDD/DVD
19 17 15
16
18
14*
17 DUBBING HDD DVD button
start One Touch Dubbing from HDD to DVD.
18 DUBBING VCR DVD button
start One Touch Dubbing from VCR to DVD.
19 PROG. / buttons
D U
(HDD/DVD)
: Press to change the channel up or
down.
(VCR)
: Press to change the channel up or down.
Press to adjust the tracking during playback or in
slow motion of the tape.
While playback is in still mode, you can adjust the
vertically blurred picture.
20 Front Panel Display
: Shows information and
messages. Refer to "Front Panel Display Guide"
on page 14.
21 RECORD I button (VCR)
start a basic recording. Press repeatedly to start
an OTR (One-touch Timer Recording). Each
press increases the recording time by 15 minutes
up to 4 hours.
22 PLAY button* (VCR)
P
Press to turn on the unit to start playback.
23 F.FWD f button* (VCR)
forward or fast search.
Press to turn on the unit to fast forward.
24 REW r button* (VCR)
rewind search.
Press to turn on the unit to rewind.
25 STOP/EJECT button (VCR)
SO
eject the videotape. Press to stop recording or
playback.
*
( )
You can also turn on the unit by pressing these
buttons.
Note
After pressing [RESET],
• The settings for the items listed below will be lost;
- Clock Setting
- Timer Programme
- Resume point
• The settings for the item listed below will not be lost,
but need to be set again;
- Channel Setting
• All other settings will remain as memorised.
8
8
HDD RECORD DVD
S-VIDEO VIDEO AUDIO
L R
13 12 11 10 9
: Press to
: Press to
:
: Press once to
: Press to start playback.
: Press to fast
: Press to rewind or
: Press to