FUNAI T3B-N8182DB Owner's Manual page 45

E3B41BD_EN_+nasi.book Page 45 Wednesday, February 7, 2007 6:49 PM
To move a title:
1 Select a title using [Cursor
[ENTER].
2 Select "Move" using [Cursor
press [ENTER].
3 Select a desired insert point using
/
[Cursor ], then press [ENTER].
To change the title name:
1 Select a title using [Cursor
[ENTER].
2 Select "Change Name" using [Cursor
then press [ENTER].
3 Enter a desired name. Refer to "Guide to Edit
Title Name" on page 75.
To erase all the titles in the Dubbing Title List:
1 Select "All Erase" using [Cursor
then press [ENTER].
2 Select "Yes" using [Cursor
[ENTER].
8
After registering all the programmes
you want, select "Start" using
[Cursor
/
[ENTER].
9
Select a desired Rec Mode using
[Cursor ], then press [ENTER].
/
HDD ➔ DVD Dubbing
Please Select Rec Mode
Fast XP SP
Title amount
Space available
• Depending on the dubbing direction or the
recording format type, the available Rec Mode
will vary.
• Select "Fast" if you want to perform the "Fast
Dubbing" (see "Fast Dubbing" on page 39 for
more details).
• Fast Dubbing is prohibited in this unit if a title
has been recorded using the NTSC system.
• "Fast" is not available when dubbing from a
Video mode disc to the HDD.
When "Auto" is selected (Just Dubbing):
• Basically the Rec Mode is set to "Fast", but it will
be changed automatically under the conditions
listed below;
- HDD to DVD dubbing;
the Rec Mode will automatically be adjusted
so the titles will fit nicely in the remaining
space of the disc when there is not enough
space in the disc.
- DVD to HDD dubbing;
the Rec Mode will automatically be adjusted
for the titles to fit a 4.7 GB DVD.
/
], then press
/
], then
/
], then press
/
],
/ / /
],
/
], then press
], then press
/ /
01/01/07(Mon) 19:53
LP EP SLP Auto
1350MB
4335MB
45
10
Select "Yes" using [Cursor
then press [ENTER].
HDD ➔ DVD Dubbing
Please Select Rec Mode
Start dubbing. Start dubbing.
Fast XP SP OK to proceed? OK to proceed? LP EP
Yes No
Title amount
Space available
Dubbing will start.
Preparing to dub.
Please wait for a moment.
HDD DVD 10%
• It may take awhile to prepare for the dubbing.
• During Fast Dubbing, the playback picture will
not appear.
• When dubbing is completed, completion
message will be displayed on the screen for a
few seconds.
To stop the dubbing in progress:
1 Press [DUBBING] for 4 seconds. Confirmation
window will appear.
2 Select "Yes" using [Cursor
[ENTER].
3 Press [ENTER] to exit.
],
/
01/01/07(Mon) 19:53
SLP Auto
1350MB
4335MB
/
], then press
EN