Page of 90

FUNAI SV2000 WV20V6 Owner's Manual

Funai owner's manual dvd/vcr combo wv20v6.
Owner's Manual
• We strongly recommend for good recording quality:
SONY DVD+RW 4x, MAXELL DVD+R 4x/8x/16x, SONY DVD+R 4x/8x/16x, TDK DVD+R 4x/8x/16x,
MAXELL DVD-RW 4x, MAXELL DVD-R 8x/16x
• Discs that have been tested and are proven to be compatible with this recorder:
VERBATIM DVD+RW 4x
VERBATIM DVD-RW 2x
DVD Recorder with Video Cassette Recorder
REW
STANDBY-ON
Supplied Accessory
• Remote control
• RF cable
(NB654UD) with
two AA batteries
If you need additional operating assistance after reading this owner's manual or
or visit our web site at http://www.funai-corp.com
Before you use this unit , you need to complete connections. Refer to
"Connections" on pages 14-16.
To record a program easily, refer to "Easy DVD recording" on pages 17-18 after
connections are completed.
(You CANNOT record on any copyright protected DVD disc with this unit.)
Note
• Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due
to the copy protection system.
VERBATIM DVD+R 8x
VERBATIM DVD-R 8x
F.FWD
STOP/EJECT
PLAY
RECORD
VCR REC
D.DUBBING
TIMER REC
VCR DVD
INSTRUCCIONES EN ESPAÑOL INCLUIDAS
• Audio/Video cables
(WPZ0901TM002)
(WPZ0102TM015
or WPZ0102LTE01)
Please read before using this equipment.
to order replacement accessories, please call
TOLL FREE : 1-800-518-1180
JVC DVD-RW 4x
WV20V6
OPEN/CLOSE
CHANNEL
D.DUBBING
SELECT
DVD REC
VCR
SOURCE
DVD
• Owner's Manual
(1VMN23120)
Owner's Manual
MAXELL DVD-R 16x
STOP
PLAY
RECORD
S-VIDEO
VIDEO
L
• Quick Guide
(1VMN23121)
AUDIO
R

   Related Manuals for FUNAI SV2000 WV20V6

   Summary of Contents for FUNAI SV2000 WV20V6

  • Page 1

    If you need additional operating assistance after reading this owner’s manual or to order replacement accessories, please call TOLL FREE : 1-800-518-1180 or visit our web site at http://www.funai-corp.com Before you use this unit , you need to complete connections. Refer to “Connections” on pages 14-16.

  • Page 2: Before You Start, Precautions

    WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.

  • Page 3

    IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.

  • Page 4

    Installation Location For safety and optimum performance of this unit: • Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. •...

  • Page 5

    Maintenance SERVICING • Please refer to relevant topics on Troubleshooting on pages 77-80 before returning the product. • If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user- serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center.

  • Page 6: Table Of Contents

    Before you start ....2 Precautions ....... 2 Table of contents .

  • Page 7: Features, Symbols Used In This Owner's Manual

    This unit not only plays DVDs, CDs and VHS tapes but also offers features for you to record on DVD discs and edit them after that. The following features are offered with this unit. Recording This unit is compatible with DVD+RW/DVD-RW, which is rewritable repeatedly and DVD+R/DVD-R, which is available for recording once.

  • Page 8: Functional Overview

    Front Panel STANDBY-ON ( * ) The unit can also be turned on by pressing these buttons. 1. STANDBY-ON button (DVD/VCR) Press to turn on and off the unit. 2. POWER ON indicator (DVD/VCR) Red LED lights up when power is on. 3.

  • Page 9

    Functional overview (cont’d) Rear Panel 1. AC Power Cord (DVD/VCR) Connect to a standard AC outlet to supply power to this unit. 2. COMPONENT VIDEO OUT jacks (DVD only) Use to connect a TV monitor with component video inputs with a component video cable. 3.

  • Page 10

    Functional overview (cont’d) Remote Control STANDBY-ON OPEN/CLOSE TIMER SET TIMER .@/: PQRS WXYZ VIDEO/TV DISPLAY SPACE CLEAR SETUP TITLE DISC MENU RETURN PLAY REC MODE RAPID PLAY PREV PAUSE NEXT SLOW CM SKIP STOP SEARCH DUBBING ZOOM AUDIO ( * ) In DVD mode, the unit can also be turned on by pressing these buttons.

  • Page 11: Installing Batteries In The Remote Control, Using A Remote Control, The Vcr/dvd Recorder Switching

    Functional overview (cont’d) Installing batteries in the remote control Install two “AA” size batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. Note: Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following: •...

  • Page 12: Setup Menus

    Functional overview (cont’d) Guide to Displays On Screen menu This unit uses the following On Screen menu for most operations: Setup menu and Title list, and Display menu. They allow you to change the playing status of the disc during play. The Display menu also gives you information on the status of the disc or a videotape.

  • Page 13: Display Menu

    Functional overview (cont’d) Display menu DVD mode First: Press [DISPLAY] to call up the Display menu. This menu will give you the information on the disc. Some operations are available while disc is inserted in the unit. 0:00:00 DVD+RW CH 8 Stereo HQ(1Hr) 1:01...

  • Page 14: Connections, Connection To A Tv

    Antenna Cable TV signal (Back of TV) Disconnect Choose one of the following connections, depending on the capabilities of the equipment you possess. Basic Audio AUDIO IN Audio cable (supplied) This unit <REAR PANEL> DVD/VCR AUDIO - OUT DVD/VCR DIGITAL AUDIO S-VIDEO COMPONENT...

  • Page 15: Connection To A Cable Box Or Satellite Box

    Connection to a TV (cont’d) After you have completed connections • Switch the input selector on your TV to an appropriate external input channel (usually near channel 0). Press a button on the TV’s original remote control that selects an external input channel until the DVD recorder’s picture appears.

  • Page 16: Connection To An Audio System

    Connection to an Audio System • When you change the connections, all devices should be turned off. • Refer to the operation manual accompanying external devices for more information. Method 1 Stereo system AUDIO Audio cable (supplied) This unit IN - AUDIO - OUT <REAR PANEL>...

  • Page 17: Getting Started, Easy Dvd Recording

    The following will help you to understand easily how to record to DVD discs. Note: Make sure batteries are in the remote control and you have connected this unit and the TV correctly. Step 1: Choose a disc type. There are several types of recordable DVD discs to choose from. This unit can record on the following type of discs.

  • Page 18

    Easy DVD recording (cont’d) Step 5: Select the desired channel. STANDBY-ON OPEN/CLOSE TIMER SET TIMER .@/: PQRS WXYZ VIDEO/TV DISPLAY SPACE CLEAR SETUP TITLE DISC MENU RETURN STANDBY-ON OPEN/CLOSE TIMER SET TIMER .@/: PQRS WXYZ VIDEO/TV CH 12 Hint 1: Play the recorded contents You can select the title you want to play from a displayed title list, and immediately start to play.

  • Page 19: Initial Setting, Channel Setting, Getting Channels Automatically

    Turn on this unit for the first time, you need to follow these steps. Press [STANDBY-ON]. Turn the TV on. Select the input to which the unit is connected. Refer to the table on page 15. “Initial Setup” will automatically appear.

  • Page 20: Adding/deleting Channels

    To select a channel You can select a channel by directly entering the channel using the Number buttons on the remote control. Notes for using the Number buttons: • When selecting cable channels which are higher than 99, enter channel numbers as a three-digit number. (For example: 117, press [1], [1], [7]) •...

  • Page 21: Selecting The Tv Stereo Or Sap

    Selecting the TV stereo or SAP You can select a sound channel to output from TV. “Stereo” has been selected as the default. Press [SETUP]. Using [K / L], select “Required Settings”. Press [OK]. Required Settings menu will appear. Notes on TV channel audio •...

  • Page 22: Setting The Clock, Auto Clock Setting

    Set the clock before you try the Timer Programming. If a Public Broadcasting Station (PBS) is available in your area, follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 23. Auto Clock Setting Make sure • The antenna/Cable TV connections are correct.

  • Page 23: Manual Clock Setting

    Manual Clock Setting Press [SETUP]. Using [K / L], select “Clock”. Press [OK]. Using [K / L], select “Clock Setting”. Press [OK]. Clock Setting menu will appear. Clock Setting VCR DVD ---- / -- / ---- ( ---- ) -- : -- -- Press [OK] again.

  • Page 24: Setting The Daylight Saving Time, Selecting The Tv Aspect Ratio

    Setting the Daylight Saving Time When “Daylight Saving Time” is “ON”, the unit clock will automati- cally move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October. “ON” has been selected as the default.

  • Page 25: Recording, Information On Dvd Recording, Information, Recordable Disc, Recording Mode

    Information on DVD recording Information This unit can record to DVD+RW/DVD-RW/DVD+R/ DVD-R discs. DVD+R/DVD-R discs can only be recorded to once. DVD+RW/DVD-RW discs can be recorded to and erased many times. This unit will record DVD+VR mode automatically. DVD-RW/DVD-R disc will be recorded in the DVD+VR mode automatically in this unit.

  • Page 26

    Information on DVD recording (cont’d) Making discs playable in other DVD player (Finalize/Make Edits Compatible) After recording on DVD+R/DVD-RW/DVD-R, you must finalize the disc in order to play on other units. (Refer to page 37.) There is no need to finalize DVD+RW discs but to “Make Edits Compatible” (refer to page 65) for playing on other units after editing.

  • Page 27: Before Recording, Replacing Disc Menu, Setting For Auto Chapter

    Replacing disc menu DVD+ DVD+RW DVD+RW DVD+R DVD+R DVD+R DVD-RW DVD- DVD-RW DVD-R DVD-R DVD-R It can be used to prohibit recording additionally or to replace the title list after recording when inserting the disc includes titles and a different type of title list recorded by other units.

  • Page 28: Basic Recording

    DVD+RW DVD+RW DVD+ DVD+R DVD+R DVD+R DVD- DVD-RW DVD-RW DVD-R DVD-R DVD-R Follow the steps below to record TV programs. Press [STANDBY-ON]. Turn the TV on and be sure to select the input to which the unit is connected. Press: Press [OPEN/CLOSE A].

  • Page 29: One-touch Timer Recording (otr)

    One-touch Timer Recording (OTR) DVD+ DVD+RW DVD+RW DVD+R DVD+R DVD+R DVD-RW DVD- DVD-RW DVD-R DVD-R DVD-R This is a simple way to set the recording time in blocks of 30 minutes. Check that the disc you are recording onto has enough space for the time you set.

  • Page 30: Timer Recording

    DVD+RW DVD+RW DVD+ DVD+R DVD+R DVD+R DVD-RW DVD-RW DVD- DVD-R DVD-R DVD-R You can program the unit to record up to 8 programs within a month in advance. Daily or weekly program recordings are also available. • Be sure to set the clock before setting a timer programming.

  • Page 31

    Checking, canceling, or correcting the timer programming information Press [TIMER SET]. TIMER REC indicator will light off on the front panel. Press [TIMER]. Timer Programming list will appear. Timer Programming VCR DVD Date Start Mode 1. JAN/01 12:57AM 1:57AM Check the information on the list you will need.

  • Page 32: Hints For Timer Recording

    Hints for Timer Recording • If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost. • If a recordable disc is not on the tray or an unrecordable disc is on the tray, “DVD REC indicator” on the front panel flashes and Timer Recording cannot be performed.

  • Page 33: Overwriting An Existing Title, Overwriting From The Beginning Of The Title

    Overwriting an existing title Overwriting from the beginning of the title DVD+ DVD+RW DVD+RW DVD- DVD-RW DVD-RW You can overwrite the existing title from the beginning. Press [STANDBY-ON] Make sure that the TV input is set on the unit. Press: Load the disc that includes a title to be overwritten.

  • Page 34: Hints For Overwriting

    Overwriting an existing title (cont’d) Hints for Overwriting When an existing title is overwritten, the title name may be changed according to the overwriting situations. Before overwriting, read the following cases and Note. When overwriting title is shorter than the existing title: (Overwriting from the beginning of the title) Overwrite recording : A...

  • Page 35: Settings For An External Source, Connection To An External Source

    Settings for an external source Connection to an external source DVD+RW DVD+ DVD+RW DVD+R DVD+R DVD+R DVD-RW DVD- DVD-RW Connect the external source properly to the unit by using input jacks either EXT2 (Front) or EXT1 (Rear). When connecting an external equipment of monaural output to this unit, use AUDIO L jack of EXT2 (Front). Use commercially available S-Video or Video cable and an Audio cable for this connection.

  • Page 36: Recording From An External Source, Setting A Disc To Protect

    Settings for an external source (cont’d) Recording from an external source DVD+R DVD+R DVD+R DVD+RW DVD+ DVD+RW DVD-RW DVD-RW DVD- Before recording from an external source, see the instructions for the connection on page 35. 1. Turn on the TV and press [STANDBY-ON] and be sure to select the input of the TV to which the unit is connected.

  • Page 37: Playing The Discs In Other Dvd Players, Finalizing A Disc

    Playing the discs in other DVD players Finalizing a disc DVD-RW DVD-R DVD+R DVD+R DVD+R DVD- DVD-RW DVD-R DVD-R You will need to finalize discs to play in other DVD players. Finalizing may take several minutes up to an hour. A shorter recording period on the disc will require a longer time period for finalization.

  • Page 38: Auto Finalizing

    Playing the discs in other DVD players (cont’d) Auto finalizing DVD+R DVD+R DVD+R DVD-RW DVD-RW DVD- DVD-R DVD-R DVD-R You can finalize discs automatically using Auto Finalize function. You can use this function to finalize discs after finishing all Timer Recordings and at the end of the disc space.

  • Page 39: Dubbing Mode

    DVD+RW DVD+ DVD+RW DVD+R DVD+R DVD+R DVD-RW DVD- DVD-RW DVD-R DVD-R DVD-R You can copy a DVD disc to a videotape or copy a videotape to a DVD disc. This function will be possible only if the DVD disc or the videotape is not copy protected.

  • Page 40

    VCR to DVD Using [K / L], select “VCR DVD”. Press [OK]. Dubbing Mode VCR DVD DVD VCR Press [SETUP] to exit. Press: Press [PLAY B]. Then press [PAUSE F] at the point you wish to start recording. • Since it takes about a few seconds before the actual dubbing begins, please allow extra 5 seconds when...

  • Page 41: Playing Discs, Information On Dvd Play

    Before you play DVD discs, read the following information. Playable discs This unit is compatible to play the following discs. To play a DVD, make sure that it meets the requirements for Region Codes and Color Systems as described below. Discs that have the following logos will play on the unit.

  • Page 42: Basic Playback, Playback

    Playback DVD-RW DVD-RW DVD- DVD+ DVD+RW DVD+RW DVD+R DVD+R DVD+R DVD-R DVD-R DVD-R Press [STANDBY-ON]. Turn the TV on and be sure to select the input to which the unit is connected. Press: Press [OPEN/CLOSE A] . The disc tray will open. Insert your disc with its label fac- ing up.

  • Page 43: Playing Mp3 Disc

    Video Video DVD-RW DVD- DVD-RW DVD-V DVD-V DVD-V DVD-V DVD-V DVD-V DVD-R DVD-R DVD-R Video CD Video CD Video CD Press [STANDBY-ON]. Turn the TV on and be sure to select the input to which the unit is connected. Press: Press [OPEN/CLOSE A] to open the disc tray.

  • Page 44: Playing Discs Using The Disc Menu, Playing Discs Using The Title Menu, Pause

    Playing discs using the disc menu DVD-V DVD-V DVD-V DVD-V DVD-V DVD-V A DVD disc contains a disc menu that describes the contents or allows you to customize the playback. For example, the menu may offer choices for subtitle languages, special features, or chapter selection.

  • Page 45: Special Playback, Resume Play, Fast Forward / Fast Reverse, Skipping Tv Commercials During Play

    Resume play DVD-V DVD-V DVD-V DVD-V DVD-V DVD-V DVD+RW DVD+RW DVD+ DVD+R DVD+R DVD+R Video Video DVD-RW DVD- DVD-RW DVD-R DVD-R DVD-R You can resume play from where you stopped playing the disc last. During playback, press [STOP C]. The resume message will appear. Resume ON Press [PLAY B].

  • Page 46: Rapid Play, Step By Step Playback, Slow Forward / Slow Reverse Play

    Rapid play DVD+RW DVD+ DVD+RW DVD-V DVD-V DVD-V DVD-V DVD-V DVD-V DVD+R DVD+R DVD+R Video Video DVD-RW DVD- DVD-RW DVD-R DVD-R DVD-R Rapid play function is available only during playback. Available only on discs recorded in the Dolby Digital format, Rapid play plays back in a slightly faster/slower speed while keeping the sound quality just as normal...

  • Page 47: Zoom, Marker Setup

    Zoom DVD-V DVD-V DVD-V DVD-V DVD-V DVD-V DVD+ DVD+RW DVD+RW DVD+R DVD+R DVD+R Video Video DVD- DVD-RW DVD-RW DVD-R DVD-R DVD-R Video CD Video CD Video CD During playback, press [DISPLAY] or [ZOOM]. Display menu will appear. 0:00:00 DVD-Video Using [{ / B], select .

  • Page 48: Search, Title/chapter Search

    Title/Chapter search DVD-V DVD-V DVD-V DVD-V DVD-V DVD-V DVD+RW DVD+RW DVD+ DVD+R DVD+R DVD+R Video Video DVD- DVD-RW DVD-RW DVD-R DVD-R DVD-R Using [PREV H / NEXT G] During playback, press [NEXT G] to skip the current title or chap- ter and move to the next.

  • Page 49: Track Search, Time Search

    Track search Video CD Video CD Video CD Using [PREV H / NEXT G] During playback, press [NEXT G] to skip the current track and move to the next. The track will move forward one at a time. To go back to the beginning of the current track, press [PREV H]. Press it repeatedly to go to the previous track.

  • Page 50: Repeat/random/program Playback, Repeat Playback, Random Playback

    Repeat/Random/Program playback Repeat playback DVD-V DVD-V DVD-V DVD-V DVD-V DVD-V DVD+ DVD+RW DVD+RW DVD+R DVD+R DVD+R Video Video DVD-RW DVD- DVD-RW DVD-R DVD-R DVD-R During playback, press [DISPLAY]. Display menu will appear. 0:00:00 DVD-Video Using [{ / B], select . Press [OK].

  • Page 51: Program Playback, Selecting The Format Of Audio And Video, Switching Subtitles

    Repeat/Random/Program playback (cont’d) Program playback Video CD Video CD Video CD You can program the disc to play in your desired order. First: Press [SETUP]. Using [K / L], select “CD Playback Mode”. Press [OK]. CD Playback Mode menu will appear.

  • Page 52: Switching Audio Soundtrack, Switching Virtual Surround System

    Selecting the format of audio and video (cont’d) Switching audio soundtrack DVD-V DVD-V DVD-V DVD-V DVD-V DVD-V Video CD Video CD Video CD When playing a DVD-Video disc recorded with two or more soundtracks (these are often in different languages), you can switch them during playback.

  • Page 53: Switching Camera Angles, Reducing Block Noise

    Selecting the format of audio and video (cont’d) Switching camera angles DVD-V DVD-V DVD-V DVD-V DVD-V DVD-V Some DVD-Video discs feature scenes shot from two or more angles, check the case for details: it should be marked with Angle icon if it contains multi-angle scenes.

  • Page 54: Editing, Information On Disc Editing, Guide To A Title List, Editing Discs

    Guide to a title list Title list allows you to check the titles recorded on the disc easily. You can choose a title to play from this list and easily edit the titles as you prefer. Press [TITLE]. NOV/21/06 11:00AM CH12 SP NOV/21/06 0:20:44 P l a y...

  • Page 55: Editing Discs, Deleting Titles

    Deleting titles DVD+RW DVD+ DVD+RW DVD+R DVD+R DVD+R DVD-RW DVD- DVD-RW DVD-R DVD-R DVD-R You can delete titles which you do not need anymore. Be advised that the titles once deleted cannot be brought back to the disc. When the last title, which is recorded in the disc, in the title list is deleted, the disc space to recorded will be increased.

  • Page 56: Putting Names On Titles

    Putting names on titles DVD+RW DVD+RW DVD+ DVD+R DVD+R DVD+R DVD-RW DVD-RW DVD- DVD-R DVD-R DVD-R You can put title names on the titles and change the names from this menu. The names you put on the titles will be displayed on a title list. First: Follow steps 1 to 3 in “Deleting titles”...

  • Page 57: Setting Chapter Marks

    Setting chapter marks DVD+RW DVD+ DVD+RW DVD+R DVD+R DVD+R DVD-RW DVD- DVD-RW DVD-R DVD-R DVD-R You can put chapter marks in each title. Once a chapter is marked, you can use it for the chapter search feature. First: Follow steps 1 to 3 in “Deleting titles”...

  • Page 58: Clearing Chapter Marks

    Clearing chapter marks DVD+RW DVD+ DVD+RW DVD+R DVD+R DVD+R DVD- DVD-RW DVD-RW DVD-R DVD-R DVD-R First: Follow steps 1 to 3 in “Deleting titles” on page 55 to display the Edit menu. Using [K / L], select “Chapter Mark”. Press [OK]. Option window will appear as illustrated step 2 on page 57.

  • Page 59: Hiding Chapters

    Hiding chapters DVD+RW DVD+RW DVD+ DVD+R DVD+R DVD+R DVD-RW DVD- DVD-RW DVD-R DVD-R DVD-R You can hide chapters from the title list. Hidden chapters are skipped during playback. First: Follow steps 1 to 3 in “Deleting titles” on page 55 to display the Edit menu.

  • Page 60: Setting Pictures For Thumbnails

    Setting pictures for thumbnails DVD+ DVD+RW DVD+RW DVD+R DVD+R DVD+R DVD-RW DVD- DVD-RW DVD-R DVD-R DVD-R You can set a picture to each title for a thumbnail. It helps you to remember the contents of the title you are playing. The beginning picture has been selected as the default.

  • Page 61: Dividing A Title

    Dividing a title DVD+ DVD+RW DVD+RW DVD-RW DVD- DVD-RW You can divide one title into two new titles. First: Follow steps 1 to 3 in “Deleting titles” on page 55 to display the Edit menu. Use [PREV H / NEXT G], [REW E], [F.FWD D], [PAUSE F] and [PLAY B] to decide the point at which you...

  • Page 62: Editing Discs (setup Menu), Putting Name On Disc

    Putting name on disc DVD+ DVD+RW DVD+RW DVD+R DVD+R DVD+R DVD-RW DVD- DVD-RW DVD-R DVD-R DVD-R You can put title names on the titles and change the names from this menu. Press [STOP C] if you are playing a disc. First: Press [SETUP].

  • Page 63: Setting Or Releasing Disc Protect

    Editing discs (Setup menu) (cont’d) Setting or releasing disc protect DVD+RW DVD+RW DVD+ DVD+R DVD+R DVD+R DVD- DVD-RW DVD-RW DVD-R DVD-R DVD-R To prevent accidental editing, or erasing the titles, you can protect them. Setting disc to protect First: Follow steps 1 to 2 in “Putting name on disc”...

  • Page 64

    Editing discs (Setup menu) (cont’d) Setting or releasing disc protect (cont'd) Releasing disc from protect First: Follow steps 1 to 2 in “Putting name on disc” on page 62 to display the Disc Edit menu. When inserting <DVD+RW> disc. Disc Edit Edit Disc Name Disc Protect ON Erase Disc...

  • Page 65: Erasing Disc, Making Edits Compatible

    Editing discs (Setup menu) (cont’d) Erasing disc Video DVD+ DVD+RW DVD+RW DVD-RW DVD- DVD-RW DVD-RW DVD-RW DVD- You can erase all titles on a disc. If you want to record on DVD-RW formatted with other than DVD+VR mode, erase all contents on the disc it will be recorded to DVD+VR automatically.

  • Page 66: Changing The Setup Menu, Tour Of The Setup Menu

    Changing the Setup menu The following table is the contents which you can set and the default settings. Refer to the following table for useful operation. Setup Items (highlight is the default) 1.Language setting Disc Menu Language Pages 67-68 Audio Language Subtitle Language 2.Display setting OSD Language...

  • Page 67: Language Setting

    Changing the Setup menu Press [STOP C] if you are playing a disc. Press [SETUP]. Using [K / L], select “Playback”. Press [OK]. Playback menu will appear. Using [K / L], select “Language”. Press [OK]. Language menu will appear. Using [K / L], desired item. Press [OK]. Disc Menu Language (Default : English) Set the language for Disc Menu.

  • Page 68: Display Setting

    Changing the Setup menu If “Other” is selected, press 4-digit code using the Number buttons. Language - Subtitle Code Input Press [SETUP] to exit. Press [STOP C] if you are playing a disc. Press [SETUP]. Using [K / L], select “Display”. Press [OK]. Display menu will appear.

  • Page 69: Audio Setting

    Changing the Setup menu Screen Saver (Default : 10 minutes) Set the time to work the screen saver function on the screen. Display OSD Language English Angle Icon Screen Saver 10 minutes Press [SETUP] to exit. Choose the appropriate Audio settings for your external equipment.

  • Page 70

    Changing the Setup menu Settings for PCM (Default : 48kHz) • Using [K / L], select a setting. Press [OK]. Digital Out - PCM Your setting will be activated. 48kHz 48kHz 96kHz 96kHz Settings for Dolby Digital (Default : Stream) •...

  • Page 71: Video Setting

    Changing the Setup menu Progressive Scan (Default : OFF) This unit is compatible with the Progressive Scan System. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to “ON”. Press [SETUP].

  • Page 72: Settings For Parental Lock Level

    Changing the Setup menu Settings for Parental lock level Some DVD-Video discs feature a Parental Lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material.

  • Page 73: Settings For Pbc (playback Control)

    Changing the Setup menu Settings for Parental lock level (cont’d) Press [SETUP] to exit. Note • Press [CLEAR] to erase numbers entered incorrectly. • When you forget the password or you want to clear all settings in Parental lock, enter 4,7,3,7 using the Number buttons in Password Input window.

  • Page 74: Vcr Functions, Playback, Recording And One-touch Timer Recording, Recording

    Playback Press [STANDBY-ON] on the remote control or the front panel of the unit. When you are playing a videotape, turn the TV on and be sure to select the input to which the unit is connected. Press: Insert a prerecorded videotape. Press [PLAY B] to begin playback.

  • Page 75: Index Search, One-touch Timer Recording (otr), Search

    Recording and One-touch Timer Recording (cont’d) One-touch Timer Recording (OTR) This feature allows you to set the recording length simply by pressing [VCR REC] on the remote control or [RECORD] (VCR) on the front panel of the unit. During normal recording, press [VCR REC] to begin the One-touch Timer Recording.

  • Page 76: Time Search, Other Operations

    Time search This feature allows you to go to a specific point on a videotape by entering the exact amount of time you wish to skip in order to reach the point. First: Press [SEARCH] repeatedly so that the TIME SEARCH menu appears.

  • Page 77: Others, Troubleshooting

    Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper performance. Symptom The power does not turn on. There is no picture.

  • Page 78

    Symptom There is no picture. Picture noise appears. There is no sound. Sound is noisy. No DTS sound is output. The unit does not play back the disc. Playback image freezes for a second. The disc does not start playback from the beginning.

  • Page 79

    Symptom “Repairing” appears on the TV screen. • If there is a power failure or unplugging during recording, finalizing, Repairing In a case you intend to cancel the Repairing process. Do you want to cancel a repairing process ? When selecting “Yes”, the disc may not be usable.

  • Page 80: Rf Output Switch

    Error message Recording Error You cannot record more than 49 titles on one disc. (The maximum is 49) Recording Error You cannot record more than 254 chapters on one disc. (The maximum is 254) Recording Error You cannot record on this disc as Power Calibration Area is full.

  • Page 81: Glossary, Language Code

    Analog audio An electrical signal that directly rep- resents sound. In contrast, digital audio which can be an electrical sig- nal, but is an indirect representation of sound. See also Digital audio. Aspect ratio The width of a TV screen relative to its height.

  • Page 82: Frequently Asked Questions, Specifications

    Frequently Asked Questions –– Can I record on CD-RW/R? No, this unit records only DVDs. –– Can I play back DVD-Video that is bought in another country? Possible only if the region code of the disc is 1 and ALL. ––...

  • Page 83

    MEMO...

  • Page 84: Español

    Estas instrucciones le ayudarán a entender fácilmente cómo grabar discos DVD. Nota: Asegúrese que las pilas están en el mando a distancia y que ha conectado correctamente esta unidad y el TV. Paso 1: Elija un tipo de disco. Puede elegir entre distintos tipos de discos DVD grabables. Este grabador de DVD puede grabar los siguientes tipos de discos.

  • Page 85

    Fácil grabación de DVD (cont.) Paso 5: Eleccione el canal des eado. STANDBY-ON OPEN/CLOSE TIMER SET TIMER .@/: PQRS WXYZ VIDEO/TV DISPLAY SPACE CLEAR SETUP TITLE DISC MENU RETURN STANDBY-ON OPEN/CLOSE TIMER SET TIMER .@/: PQRS WXYZ VIDEO/TV CH 12 Sugerencia 1: Reproduzca el contenido grabado Puede seleccionar el título que desea reproducir de un menú...

  • Page 86

    Reproducción con videograbadora Presione [STANDBY-ON] en el mando a distancia o el panel frontal de la unidad. Cuando reproduzca una cinta, conecte el TV y asegúrese de seleccionar la entrada donde se conecta la unidad. Presione: Coloque una cinta pregrabada y presione [PLAY B] para empe- zar la reproducción.

  • Page 87

    Grabación y grabación con temporizador de un toque (VCR) Grabación Primero: Antes de grabar, asegúrese de que: • Se seleccionó el canal deseado presionando los botones numéricos en el mando a distancia o los botones [CH K / L] en el mando a distancia o [CHANNEL L / K] en el panel frontal de la unidad.

  • Page 88

    FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase.

This manual also for:

Wv20v6

Comments to this Manuals

Symbols: 0
Latest comments:
  • Hugh L Phillips Aug 29, 2014 11:03:
    When the component is turned on, the tv displays an interrupt signal.