Initial Setups; For The First Time Use; Channel Setting; Auto Tuning - FUNAI T3B-N8182DB Owner's Manual

E3B41BD_EN_+nasi.book Page 18 Wednesday, February 7, 2007 6:49 PM

Initial Setups

For the First Time Use

Right after the purchase of the unit, do the Initialise
Setting by doing the following procedures.
This menu may not appear if you have already turned
on the unit.
1
After making all the necessary
connections, turn on the TV. Select
the appropriate external input
channel.
(See pages 15 to 16.)
2
Press [STANDBY-ON].
3
Press [ENTER] to start Auto Channel
Tuning.
Start Auto-tuning Start Auto-tuning
If you like to skip this step, press [RETURN
4
Use [Cursor
current time then press [ENTER].
Clock Setting
01 / 01 / 2007 (Mon) 19 :
EN
OK
].
] to set
/ / /
--/--/--(---) --:--
Clock Setting
34

Channel Setting

Auto Tuning

If you have already set the channels when you first
turned on the unit, you can skip this section.
After resetting the settings or whenever you move to a
new area, we recommend you to programme available
channels in your area with the following procedures.
1
Press [SETUP] in stop mode.
Setup Menu will appear.
2
Select "Initial Setting" using
[Cursor ], then press [ENTER].
/
Setup Menu
Disc Management
Editing
Dubbing
Timer Programme
Title List
Initial Setting
Digital Audio Setting
Playback
Recording
Display
3
Select "Channel Setting" using
[Cursor ], then press [ENTER].
/
Initial Setting
Clock Setting
Channel Setting
TV Aspect
Select Video
Video Out
4
Select "Auto Tuning" using
[Cursor ], then press [ENTER].
/
Initial Setting
Clock Setting
Auto Tuning
Channel Setting
Manual Tuning Manual Tuning
TV Aspect
Move Move
Select Video
Video Out
The unit will start storing channels available in
your area.
18
01/01/07(Mon) 19:34
01/01/07(Mon) 19:34
01/01/07(Mon) 19:34