Connecting To External Equipment; Digital Audio For Better Sound Quality - FUNAI T3B-N8182DB Owner's Manual

E3B41BD_EN_+nasi.book Page 16 Wednesday, February 7, 2007 6:49 PM
3
Connect the AUDIO OUT jacks of this
unit to the analogue Audio input
jacks of your TV. Use a commercially
available Audio cable.
AUDIO
IN
S-Video
Audio cable
cable (not
(not supplied)
supplied)
DVD / VCR
DIGITAL
DECODER)
AUDIO OUT
OPTICAL COAXIAL
1 (TV)
Note for a TV with no S-Video input jack or Scart
jack:
• This unit has no RF modulator, so this type of TV
cannot be used.
• Only component connection is compatible with the
Progressive Scan.

Connecting to External Equipment

This unit has three input terminals, AV1(TV) or
AV2(DECODER) on the rear panel and AV3 on the
front panel. Be sure that all the units are off before
making any connections.
Recording from a HDD / DVD player, VCR,
Satellite Box or other Audio-Video
equipment with a Scart output jack (AV2)
AV output
Jack (Scart)
Scart cable (not supplied)
HDD / DVD / VCR
AV2 (DECODER)
AV1 (TV)
Note
• When you record a TV programme from a Satellite
Box, you must connect a Scart cable to
AV2(DECODER). (See page 38.)
• When AV2 is connected, the signal from the AV2 will
be output automatically. If you want to monitor the
signal from other input, you must press [DISPLAY]
first. Then, select the desired input to monitor with
[INPUT SELECT].
EN
S-VIDEO Component
IN Video IN
or Y P B /C B P /C R
Component
Video cable
(not supplied)
HDD/DVD
AUDIO S-VIDEO COMPONENT
OUT OUT VIDEO OUT
ANTENNA
Y
IN
L
P
B
/C
B
R
P OUT
R
/C
R
AV2(DECODER)
HDD/DVD
DIGITAL AUDIO S-VIDEO COMPONENT
AUDIO OUT OUT OUT VIDEO OUT
ANTENNA
Y
IN
L
OPTICAL COAXIAL
P
B
/C
B
R
P OUT
R
/C
R
Recording from a camcorder or other
Audio-Video equipment with no Scart output
jack (AV3)
If no S-Video input jack is available, connect to
VIDEO input jack on the front panel using an RCA
Video cable.
Set "S-Video In" when using S-VIDEO input jack.
(See page 47.)
AV3 (Front)
STOP PLAY HDD RECORD DVD
VD
S-VIDEO VIDEO
HDD/DVD
S-Video cable
(not supplied)
S-VIDEO
OUT

Digital Audio for Better Sound Quality

Digital audio Dolby Digital decoder,
input jacks DTS decoder or
MPEG decoder, etc.
OPTICAL COAXIAL
Coaxial cable
(not supplied)
or
Optical cable
(not supplied)
The connections illustrated above are
optional for better sound.
1
For clear digital sound quality, use
the DIGITAL AUDIO OUT (OPTICAL /
COAXIAL) jacks to connect your
digital audio equipment.
If the audio format of the digital output does not
match the capabilities of your receiver, the
receiver will produce a strong, distorted sound or
no sound at all.
16
L AUDIO R
Audio cable
(not supplied)
AUDIO
OUT
HDD/DVD
DIGITAL AUDIO S-VIDEO COMPONENT
OUT OUT VIDEO OUT
AUDIO OUT
Y
L
OPTICAL COAXIAL
P
B
/C
B
R
P
R
/C
R
HDD/DVD
DIGITAL AUDIO S-VIDEO COMPONENT
OUT OUT VIDEO OUT
AUDIO OUT
ANTENNA
Y
IN
L
OPTICAL COAXIAL
P
B
/C
B
R
OUT
P
R
/C
R