P: Program Ae - Canon EOS REBEL T1 i/EOS 500D Instruction Manual

P:
Program AE
IIJIlBDIILIBJil",BllRlilllllinI:'UF
=
To obtain a good exposure of the subject, the camera sets the exposure
(shutter speed and aperture) automatically. This is called Program AE.
-Ifll;(.~,",?
":'1
Set the Mode Dial to
<
P
>.
E({(~\
\~.:--
Focus the subject.
~
Look through the viewfinder and aim
the selected AF point over the
subject. Then press the shutter button
halfway.
~$
The dot inside the AF point achieving
focus flashes briefly in red, and the
focus confirmation light
<.
>
in the
viewfinder's bottom right lights (with
One Shot AF + automatic AF point
selection).
~,
The shutter speed and aperture will
be set automatically and displayed in
the viewfinder.
3
Check the shutter speed and
aperture display.
@}
A correct exposure will be obtained
as long as the shutter speed and
aperture display do not blink.
Take the picture.
-@}
Compose the shot and press the
shutter button completely.
58