Transferring Images To A Computer - Canon EOS REBEL T1 i/EOS 500D Instruction Manual

rE...
Transferring Images to a Computer
11' f. UI
By connecting the camera to a computer, you can transfer images from
the camera's card by operating the camera. This is called direct image
transfer.
o
Before connecting the camera to a computer, be sure to install
the provided software (EOS DIGITAL Solution Disk on CD-
ROM) in the computer.
For instructions to install the provided software, see the separate
sheet, CD-ROM Guide.
Preparation for Image Transfer
Set the camera's power switch to
<OFF>.
Set the shooting mode to any
mode except
<."
>.
~
,
I,.
!
t
~j
...........•.•.......................•...••.••.•...
~
. ...
:
. •.••...•....•.......
~.~
........•........•.....••..•...............•.............•..........
"
........•.....
:
. .....•...
. ·.·.·.Iii..
I.\(,~
•.•.•..
:,
~ c~,~~,_.
..'
3
Connect the camera to the
computer.
4ft
Use the interface cable provided with
the camera.
~
When connecting the cable plug to
the camera's
<A/V OUT
/DIGITAL>
terminal, the cable plug's
<
~
>
icon
must face the front side of the
camera.
1t
Connect the plug on the other end of
the cable to the computer's USB port.
177
I