Installing And Removing The So Card - Canon EOS REBEL T1 i/EOS 500D Instruction Manual

Installing and Removing the SO Card
11111111-. .
The captured image is recorded onto the card (sold separately).
o
Make sure the card's write protect switch is set upward to
enable writing/erasing.
Installing the Card
' 1
Open the cover.
11
Slide the cover as shown by the
arrow to open it.
•
Card's write
protect switch
i-r'~;~
:-;>.5.:"
' : -1.-
-:.
I
.-
_--_
-.
__
.-----.--------- ..
_-_
; .'
Shots remaining
Insert the card.
*
As shown by the illustration, face
the card's label side toward you
and insert it until it clicks in place.
Close the cover.
~
Close the cover and slide it in the
direction shown by the arrow until it
snaps shut.
~
When you set the power switch to
<
ON
>,
the number of remaining
shots will be displayed on the LCD
monitor.
[i]
1*
The number of shots remaining depends on the remaining capacity of
the card, image-recording quality, ISO speed, etc.
~
Setting the [0· Release shutter without card] menu option to [Disable]
will prevent you from forgetting to install a card (p.130).
31