Canon EOS REBEL T1 i/EOS 500D Instruction Manual page 165

Preparing to Print
Playback the image.
Press the < [E > button.
The image will appear, and the
<
t(
>
icon will appear on the upper left to
indicate that the camera is connected
to a printer.
The <
~A?'
> button lamp will light in
blue.
@,
Movies cannot be printed.
;£
The camera cannot be used with printers compatible only with CP Direct
or Bubble Jet Direct.
@
Do not use any interface cable other than the one provided.
f$
If there is a long beeping sound in step 5, it indicates a problem with the
printer. To find out what's wrong, do the following:
1. Press the
<IB>
button to playback the image.
2. Press
<@>.
3. On the print setting screen, select [Print].
The error message will be displayed on the LCD monitor (p.172).
aJ
"®
If you use the battery to power the camera, make sure it is fully charged.
I
With a fully-charged Battery Pack LP-E5, printing up to about 4 hours is
possible.
1@
Before disconnecting the cable, turn off the camera and printer first. Hold
the plug (not the cord) to pullout the cable.
@;
For direct printing, using the AC Adapter Kit ACK-E5 (sold separately) to
power the camera is recommended.
165