Canon EOS REBEL T1 i/EOS 500D Instruction Manual page 134

Handy Features
i 1m! Itlt!]]1 IIf
!II
HII: HI 11111 I
mil
II I I
j
I
Im!l
Auto Rotate of Vertical Images
Vertical images are rotated automatically so they
are displayed vertically on the camera's LCD
monitor and computer instead of horizontally. The
setting of this feature can be changed.
Under the
[~.]
tab, select [Auto rotate],
then press
<
@
>.
The available settings
are described below. Select one, then
press
<@>.
$
[OnO.]: The vertical image is automatically rotated during playback
on both the camera's LCD monitor and on the computer.
$
[On.] : The vertical image is automatically rotated only on the
computer.
[Off] : The vertical image is not automatically rotated at all.
FAQ
*W
The vertical image is not rotated during the image review
immediately after it is captured.
Press the < [B> button and the image playback will display the rotated image.
$
[On
0 . ]
is set, but the image does not rotate during playback.
Auto rotate
will not work with vertical images
captured while [Auto
rotate] was set to [Off]. Also, if the vertical image is taken while the
camera is pointed up or down, the image might not rotate for
playback. In such a case, see "Rotating the Image" on page 151.
On the camera's LCD monitor, I want to rotate an image
captured when [On.] had been set.
Set [OnO
~],
then playback the image. It will be rotated .
. \ fJi
The vertical image does not rotate on the computer screen.
The software used is not compatible with image rotation. Use the
camera's provided software instead.
134