Installing and Removing the BatterylL "....
Installing the Battery
Load a fully charged Battery Pack LP-E5 into the camera.
Open the battery compartment
cover.
~
Slide the lever as shown by the arrow
and open the cover.
Insert the battery.
G
Insert the end with the battery
contacts.
~
Insert the battery until it locks in
place.
Close the cover.
• Press the cover until it snaps shut.
Removing the Battery
Open the cover and remove the
battery.
• Press the battery release lever as
shown by the arrow and remove the
battery.
• To prevent short circuiting, be sure to
attach the protective cover to the battery.
-- After opening the battery compartment cover, be careful not to swing it back
further. Otherwise, the hinge might break.
26