Canon EOS REBEL T1 i/EOS 500D Instruction Manual page 169

11
.r:·.
t(Printing
5
Set the date and file number
imprinting.
e
Set as necessary.
@
Select
<~>,
then press <@>.
@
Set as desired, then press <@>.
Set the number of copies.
11·
Set as necessary.
• Select
<~>,
then press <@> .
• Set the number of copies, then press
<@>.
Start printing.
,~
Select [Print], then press <@> .
... The
<
~1tV'
>
button's blue lamp will
blink and the printing will start.
[]]@
With Easy printing, you can print another image with the same settings.
Just select the image and press the
<~Ai">
button lit in blue. With Easy
printing, the number of copies will always be 1. (You cannot set the
number of copies.) Also, any trimming (p.171) will not be applied.
@
The [Default] setting for printing effects and other options are the
printer's own default settings as set by the printer's manufacturer. See
the printer's instruction manual to find out what the
[Default]
settings are.
I
**
Depending on the image's file size and image-recording quality, it may
take some time for the printing to start after you select [Print].
@
If image tilt correction (p.171) has been applied, it will take longer to print
the image.
$b
To stop the printing, press
<§>
while [Stop] is displayed, then select [OK].
**
If you execute [Clear all camera settings] (p.136), all the settings will
revert to the default.
169