Lens Peripheral Illumination Correction - Canon EOS REBEL T1 i/EOS 500D Instruction Manual

Il!iI3mJ
Lens Peripheral Illumination Correction _
Due to the lens characteristics, the four corners of the picture might look
darker. This is called lens light fall-off or drop in peripheral illumination.
This can be corrected. For JPEG images, lens light fall-off is corrected
when the image is captured. For RAW images, it can be corrected with
Digital Photo Professional (provided software).
The default setting is [Enable].
Quality
~L
Beep On
Release shutter without card
Review time 2sec.
Peripheral illumin. correct.
Peripheral iIIumin. correct.
Attached lens
EF-S18-55mm f/3. 5-5.6 IS
Correction data
available
Correction
Enable
Disable
Select [Peripheral illumin.
correct.].
*
Under the [Of] tab, select
[Peripheral iIIumin. correct.], then
press
<@>.
2
Set the correction setting.
~
On the screen, check that the
attached lens' [Correction data
available] is displayed.
~
If [Correction data not available] is
displayed, see "About the Lens
Correction Data" on the next page.
ff
Press the
< . .
T
>
key to select
[Enable], then press
<@>.
3
Take the picture.
~
The image will be recorded with the
corrected peripheral illumination.
100
Correction enabled
Correction disabled