Access Authentication Control Commands - D-Link DGS-3100 SERIES Cli Manual

ACCESS AUTHENTICATION CONTROL COMMANDS

The Access Authentication Control commands in the Command Line Interface (CLI) are listed (along
with the appropriate parameters) in the following table.
Command
create authen_login
method_list_name
config authen_login
delete authen_login
method_list_name
show authen_login
create authen_enable
method_list_name
config authen_enable
delete authen_enable
method_list_name
show authen_enable
config authen
application
show authen
application
create authen
server_host
config authen
server_host
delete authen
server_host
show authen
server_host
local_enable admin
config admin
local_enable
Each command is listed in detail, as follows:
Parameter
<string 12>
[default | method_list_name <string 12>| http_method_list | https_method_list]
method {tacacs+ | radius | local | none}
<string 12>
{all | default | http_method_list | https_method_list | method_list_name <string
12>}
<string 12>
[default | method_list_name <string 12>] method {tacacs+ | radius | local_enable
| none}
<string 12>
[all | default | method_list_name <string 12>]
{console | telnet | ssh | all] [login | enable] [default | method_list_name <string
12>]
<ipaddr> protocol [tacacs+ | radius] {port <int 1-65535> | key [<key_string 128> |
none] | timeout <int 1-30> | retransmit <int 1-10> | priority [first | second | third]}
<ipaddr> protocol tacacs+ {port <int 1-65535> | key [<key_string 128> | none] |
timeout <int 1-30>} priority [first | second | third]
<ipaddr> protocol [tacacs+ | radius]
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
29
172