Command History List Commands - D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
The Command History List commands in the Command Line Interface (CLI) are listed (along with the
appropriate parameters) in the following table.
Command
?
show
command_history
dir
config
command_history
Each command is listed in detail, as follows:
?
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display all of the commands in the CLI:
DGS3100# ?
..
?
clear
clear arptable
clear counters
clear fdb
clear log
clear port_security_entry port
config 802.1p default_priority
config 802.1p user_priority
config 802.1x auth_mode
config 802.1x auth_parameter ports
config 802.1x auth_protocol
config 802.1x capability ports
config 802.1x init
config 802.1x reauth
config access_profile profile_id
157

COMMAND HISTORY LIST COMMANDS

Parameter
<value 10-237>
To display all commands in the Command Line Interface (CLI).
?
The ? command displays all of the commands available through the
Command Line Interface (CLI).
{<command>} – Lists all the corresponding parameters for the
specified command, along with a brief description of the command's
function and similar commands having the same words in the
command.
None.
26