Setting Up Group Owner Intent - ActionTec SBWD100B User Manual

channels (where less devices work) will provide better performance.
Wireless network analysis software, such as the Wi-Fi Analyzer, can help you identify a clean
channel.
3. Click the Apply button, and then click OK on the pop-up message box to confirm.

5.3.18. Setting up Group Owner Intent

When the AGO function is disabled, the Group Owner Intent function is available. The
Group Owner Intent function is used to determine which device (receiver or connecting
device) will be the group owner.
1. Go to the Features tab page by clicking the Features tab.
2. Properly configure the Group Owner Intent value and click the Apply button.
Note: The larger the value is, the more likely the receiver becomes the group owner of the
P2P connection.
3. Click the Apply button, and then click OK on the pop-up message box to confirm.
4. The receiver reboots, and new settings take effect after the reboot.