Configuring The Receiver; Renaming The Receiver - ActionTec SBWD100B User Manual

5.3. Configuring the Receiver

After you have logged into the local management console, you can configure ScreenBeam
Pro on the webpage.

5.3.1. Renaming the Receiver

1. Go to the Device Configuration tab page by clicking the Device Configuration tab.
2. Set the Device Name Access to Enable.
3. Type a new name in the Device Name box.
4. Click the Apply button, and then click OK on the pop-up message box to confirm.
5.3.2. Setting up Login Username and Password for the Local
Management Console
You can modify the user name and password for logging into the local management server.
1. Go to the Device Configuration tab page by clicking the Device Configuration tab.