Wireless Display Receiver Model # SBWD50A Installation Guide This Installation Guide will walk you through the easy steps to set up your ScreenBeam Mini Receiver. During this process, we’ll show you how to : Install the Receiver Connect Using Windows 8.1 or Higher Connect Using Intel WiDi App Connect Using WiFi Miracast-Enabled Device...
Page 2
Welcome! Congratulations on your purchase of a ScreenBeam Mini Wireless Display Receiver. The Mini Wireless Display Receiver connects to your compatible Intel WiDi or Miracast wireless display-capable device, and displays the device’s screen on your HDTV. Install the Receiver Step Get the ScreenBeam Mini Wireless Display Receiver, USB cable and HDMI extension cable from the ScreenBeam Mini box.
Page 3
Step Turn on your TV and switch the input source until you see the Ready to Connect screen. Note: If you cannot plug the Receiver into an HDMI port on your TV (due to other components, or a poorly accessible port), use the supplied HDMI extension cable to connect the Receiver.
Page 4
If there is no available USB port on your HDTV, you can power the Receiver with an AC power adapter. The AC power adapt- er is an optional accessory. The ScreenBeam Mini Receiver is now connected to your HDTV. Proceed to one of the next three sections of this Guide (depending on the device you are using to connect to ScreenBeam Mini) to finish the connection procedure.
Page 5
Receiver from the list. Step Enter the PIN as displayed on the television screen, then connect and display. Note: If you are running Windows 8.1 and the screens above do not appear, go to http://www.actiontec.com/widi81 for the latest software updates.
Page 6
Connect Using Intel WiDi App Note: If your device’s OS is Windows 8.1 or higher, proceed to section B (“Connect Using Windows 8.1 or Higher”) for connection instructions. Step Find the Intel Wireless Display application on the device and launch it. To find the application, go to Windows Search on your device and search for “Intel WiDi”...
Page 7
Step The HDTV displays messages to show the status of the connection process. Step A Connection Successful screen appears on your device’s screen, as well as on the HDTV. Display Tip: If the edges of the device screen cannot be seen on the HDTV, adjust cropping.
Page 8
Connect Using Miracast-Enabled Device You can connect to ScreenBeam Mini from a Miracast-enabled Android device, such as a smartphone, tablet, or game console (find the wireless display feature in Settings). Also, the device should be running the latest software for best performance. Step On a Miracast-enabled Android device, locate and open the Wireless Display Application.
Page 9
Product Support & Additional Information Go to http://international.actiontec.com/support for prod- uct support, updates, and more information including: • Firmware Updates • Troubleshooting • Registration • FAQs...
Page 10
Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Actiontec Electronics, Inc, may void the user’s authority to operate the equipment. Declaration of conformity for products marked with the FCC logo – United States only.
Page 11
The transmitter must not be co-located or operating in conjunction with any other antenna or transmit- ter. For questions regarding your product or the FCC/Industry Canada declaration, contact: Actiontec Electronics, Inc. 760 North Mary Avenue, Sunnyvale, CA 94086, United States Tel: (408) 752-7700 Fax: (408) 541-9005...