5. Verify that the "Ready To Connect" screen appears on the HDTV.
The Receiver is now connected to the HDTV monitor. To connect it to
either a compatible Windows 7/8 laptop/PC, Wi-Fi Miracast device, or
laptop with Intel WiDi 3.5 or later, refer to one of the following sections
of this chapter.
Setting Up a Windows 7/8 Computer
If your Windows 7/8 computer does not have Miracast or WiDi enabled,
you must load the ScreenBeam Wireless Display software onto the laptop,
connect the USB Transmitter, and then pair the Receiver to the USB
Transmitter. Make sure you have the following items handy:
•
ScreenBeam USB Transmitter
•
ScreenBeam Wireless Display software CD
•
A compatible computer running Windows 7 or 8
!
!
Connecting to a Receiver
11